Electronics and Communication Engineering - Electronic Devices and Circuits
Exercise : Electronic Devices and Circuits - Section 14
- Electronic Devices and Circuits - Section 1
- Electronic Devices and Circuits - Section 2
- Electronic Devices and Circuits - Section 3
- Electronic Devices and Circuits - Section 4
- Electronic Devices and Circuits - Section 5
- Electronic Devices and Circuits - Section 6
- Electronic Devices and Circuits - Section 7
- Electronic Devices and Circuits - Section 8
- Electronic Devices and Circuits - Section 9
- Electronic Devices and Circuits - Section 10
- Electronic Devices and Circuits - Section 11
- Electronic Devices and Circuits - Section 12
- Electronic Devices and Circuits - Section 13
- Electronic Devices and Circuits - Section 14
- Electronic Devices and Circuits - Section 15
- Electronic Devices and Circuits - Section 16
41.
The effect of a finite gain of operational amplifier used in an integrator is that
42.
The ripple factor from a capacitor filter __________ as the load resistance __________ .
43.
Of the various capacitances associated with a junction transistor the gain bandwidth product is affected to maximum extend by
44.
Choose proper substitutes for x and y to make the following statement correct.
Tunnel diode, Avalanche photodiode are operated in x bias and y bias respectively.
Tunnel diode, Avalanche photodiode are operated in x bias and y bias respectively.
45.
Assertion (A): When a zener diode breakdown, occurs the voltage across it is constant.
Reason (R): The upper limit of zener current is determined by power handling capacity.
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers