Electronics and Communication Engineering - Digital Electronics
Exercise : Digital Electronics - Section 20
- Digital Electronics - Section 13
- Digital Electronics - Section 24
- Digital Electronics - Section 23
- Digital Electronics - Section 22
- Digital Electronics - Section 21
- Digital Electronics - Section 20
- Digital Electronics - Section 19
- Digital Electronics - Section 18
- Digital Electronics - Section 17
- Digital Electronics - Section 16
- Digital Electronics - Section 15
- Digital Electronics - Section 14
- Digital Electronics - Section 1
- Digital Electronics - Section 12
- Digital Electronics - Section 11
- Digital Electronics - Section 10
- Digital Electronics - Section 9
- Digital Electronics - Section 8
- Digital Electronics - Section 7
- Digital Electronics - Section 6
- Digital Electronics - Section 5
- Digital Electronics - Section 4
- Digital Electronics - Section 3
- Digital Electronics - Section 2
21.
Which of the following can provide a digital signal?
22.
If all bubbles are removed, what are the new RAM locations?
The 8156 of a figure has RAM locations from 2000 H to 20 FFH.

The 8156 of a figure has RAM locations from 2000 H to 20 FFH.

23.
Data are recorded on a 2, 400 ft reel of magnetic tape at a density of 556 characters per inch. If the record length is of 100 characters and 0.75 inch of record gap, the tape utilization factor is
24.
Some of MOS families are PMOS, CMOS, the family dominating the LSI field, where low power consumption is necessary is
25.
For a particular type of memory the access time and cycle time are 200 ns each. The maximum rate at which data can be accessed by
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers