Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 4 (Q.No. 17)
17.
Lapped splices in tensile reinforcement are generally not used for bars of size larger than
Discussion:
15 comments Page 1 of 2.
Jain said:
4 years ago
32mm according to new amendment.
(2)
Varoom said:
7 years ago
32mm is right.
(1)
Hemant said:
7 years ago
When bar dia greater than 36mm then lapped not used, welding is used.
(1)
Mohammed Furqan said:
6 years ago
Before amendment 4 it was 36.
Now it's 32mm.
Now it's 32mm.
(1)
Saurabh said:
5 years ago
Before 4th (2013) amendment it was 36 now it's 32.
(1)
Yamanoor said:
9 years ago
Lap splicing of reinforcement bar more than 36mm in diameter should be avoided. In case such bars have to be lapped then they should be welded. When welding of cold bars is allowed, the special instructions applicable to these bars should be followed.
Vijay said:
8 years ago
By which clause, The answer is 36?
Praveen said:
8 years ago
Answer is C.
Anju said:
8 years ago
Clause is 26.2.5.1.a.
Tamal said:
8 years ago
Answer is 32mm.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers