Civil Engineering - RCC Structures Design - Discussion

Discussion Forum : RCC Structures Design - Section 4 (Q.No. 17)
17.
Lapped splices in tensile reinforcement are generally not used for bars of size larger than
18 mm diameter
24 mm diameter
30 mm diameter
36 mm diameter
32 mm diameter
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
15 comments Page 1 of 2.

Yash Patel said:   3 years ago
As per the revised amendment of 2013, there is no revision of clause 26.2.5.1.

So it's false. Check it out.

Jain said:   4 years ago
32mm according to new amendment.
(2)

Sahil Chavda said:   5 years ago
Tensile reinforcement -36 mm.

Compression reinforcement- 30 mm.

Saurabh said:   5 years ago
Before 4th (2013) amendment it was 36 now it's 32.
(1)

Soudipacharya said:   5 years ago
Absolutely correct @Furqan.

It is according to IS 456:2000.

Mohammed Furqan said:   6 years ago
Before amendment 4 it was 36.
Now it's 32mm.
(1)

Ayon said:   7 years ago
Yes, it is 36 mm as per clause 26.2.5.1(a).

Saddam said:   7 years ago
As per clause 26.5.1(a) of IS-456-2000, Lap Splices shall not be used for bars larger than 36 mm.

Hemant said:   7 years ago
When bar dia greater than 36mm then lapped not used, welding is used.
(1)

Varoom said:   7 years ago
32mm is right.
(1)


Post your comments here:

Your comments will be displayed after verification.