Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 4 (Q.No. 17)
17.
Lapped splices in tensile reinforcement are generally not used for bars of size larger than
Discussion:
15 comments Page 1 of 2.
Yash Patel said:
3 years ago
As per the revised amendment of 2013, there is no revision of clause 26.2.5.1.
So it's false. Check it out.
So it's false. Check it out.
Jain said:
4 years ago
32mm according to new amendment.
(2)
Sahil Chavda said:
5 years ago
Tensile reinforcement -36 mm.
Compression reinforcement- 30 mm.
Compression reinforcement- 30 mm.
Saurabh said:
5 years ago
Before 4th (2013) amendment it was 36 now it's 32.
(1)
Soudipacharya said:
5 years ago
Absolutely correct @Furqan.
It is according to IS 456:2000.
It is according to IS 456:2000.
Mohammed Furqan said:
6 years ago
Before amendment 4 it was 36.
Now it's 32mm.
Now it's 32mm.
(1)
Ayon said:
7 years ago
Yes, it is 36 mm as per clause 26.2.5.1(a).
Saddam said:
7 years ago
As per clause 26.5.1(a) of IS-456-2000, Lap Splices shall not be used for bars larger than 36 mm.
Hemant said:
7 years ago
When bar dia greater than 36mm then lapped not used, welding is used.
(1)
Varoom said:
7 years ago
32mm is right.
(1)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers