Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 4 (Q.No. 17)
17.
Lapped splices in tensile reinforcement are generally not used for bars of size larger than
Discussion:
15 comments Page 1 of 2.
Yamanoor said:
9 years ago
Lap splicing of reinforcement bar more than 36mm in diameter should be avoided. In case such bars have to be lapped then they should be welded. When welding of cold bars is allowed, the special instructions applicable to these bars should be followed.
Vijay said:
8 years ago
By which clause, The answer is 36?
Praveen said:
8 years ago
Answer is C.
Anju said:
8 years ago
Clause is 26.2.5.1.a.
Tamal said:
8 years ago
Answer is 32mm.
Varoom said:
7 years ago
32mm is right.
(1)
Hemant said:
7 years ago
When bar dia greater than 36mm then lapped not used, welding is used.
(1)
Saddam said:
7 years ago
As per clause 26.5.1(a) of IS-456-2000, Lap Splices shall not be used for bars larger than 36 mm.
Ayon said:
7 years ago
Yes, it is 36 mm as per clause 26.2.5.1(a).
Mohammed Furqan said:
6 years ago
Before amendment 4 it was 36.
Now it's 32mm.
Now it's 32mm.
(1)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers