Mechanical Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 4 (Q.No. 24)
24.
Two shafts 'A' and 'B' have the same material. The shaft 'A' is solid of diameter 100 mm. The shaft 'B' is hollow with outer diameter 100 mm and inner diameter 50 mm. The torque transmitted by shaft 'B' is __________ as that of shaft 'A'.
Discussion:
12 comments Page 1 of 2.
Pavan said:
3 years ago
Actually, as per the direct formula.
The Ratio of torque in case of hollow and solid shafts subjected to the same maximum shear stress.
T(hollow)/T(solid) = (D^4 - d^4)/D^4.
If you substitute in this formula you get exactly 15/16.
The Ratio of torque in case of hollow and solid shafts subjected to the same maximum shear stress.
T(hollow)/T(solid) = (D^4 - d^4)/D^4.
If you substitute in this formula you get exactly 15/16.
Julius said:
4 years ago
What's the value of τ?
(1)
Jitendra kumar yadav said:
5 years ago
The right answer is 16/15.
(1)
Krishna said:
5 years ago
Here, we can put d = D/2 in formula.
Varma said:
6 years ago
16/15 is the correct one.
(3)
Pratiksha said:
7 years ago
What is the value of tau?
Saurav said:
7 years ago
The correct Answer is 16/15.
(1)
Avtar said:
7 years ago
Answer should be 16/15.
(1)
Ankush said:
7 years ago
Strength of shaft depends upon the section modulus of shaft i.e. π/16 d^3.
Put the values of dia and compare the results.
Put the values of dia and compare the results.
Anand said:
8 years ago
Good explanation. Thanks.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers