Mechanical Engineering - Production Engineering - Discussion

Discussion Forum : Production Engineering - Section 1 (Q.No. 3)
3.
If the diameter of the hole is subject to considerable variation, then for locating in jigs and fixtures, the pressure type of locator used is
conical locator
cylindrical locator
diamond pin locator
vee locator
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
13 comments Page 1 of 2.

Mohit sharma said:   5 years ago
1. Conical locator is used for locating the workpieces having a cylindrical hole in the workpiece. The workpiece is found located by supporting it over the conical locator inserted into the drilled hole of the workpiece.

2. Vee locator is used for locating the circular and semi-circular type of Workpieces.

3. Cylindrical locator is used for locating components.

Having drilled holes. The cylindrical component to be located is gripped by a Cylindrical locator fitted to the jig's body and inserted in the drilled hole of the Component.
(6)

Vikash Sindhania said:   7 years ago
Diamond is also a hard material and good strength but at any situation it breaks then it become too costly to purchase. As compared to another tool.

Jiauddin said:   10 years ago
The diameter of a Conical locator is gradually decrease towards the bottom side so it is easy to fix an object in considerable variation.

Onkar said:   7 years ago
What is the difference between conical and diamond locator?

Why diamond locator not use? I think it's also usable in this situation.

Dilute said:   10 years ago
The conical locator has a wide range of variation in diameter which can be held on so for this case it is suitable.

Rahul said:   1 decade ago
Conical locator shape in triangle in round shape as diameter variation locating adjustable in the hole.

Rahul sharma said:   9 years ago
Conical pins provides line contact and recommended for work pieces with varying hole size.

Sanjeev said:   8 years ago
Conical locators are used TP center work piece and are used for rough bore location.

Venkatesh said:   6 years ago
Explain pressure type of locators in jigs and fixtures.
(1)

Gokul said:   7 years ago
Why Diamond locator cannot be used? Please explain it.


Post your comments here:

Your comments will be displayed after verification.