Mechanical Engineering - Automobile Engineering - Discussion
Discussion Forum : Automobile Engineering - Section 1 (Q.No. 8)
8.
A clutch is usually designed to transmit maximum torque which is
Discussion:
28 comments Page 2 of 3.
AQUIB said:
1 decade ago
Yes factor of safety matters in this query and because 150 % we should understand it logically considering the FOS. Instead of 100% or even 175 200 etc.
Kirti said:
1 decade ago
While designing weight of component, manufacturing time and life of component are also matters along with (FOS) i.e Factor of Safety, and by calculations every values are considered.
If we take 200% or 175% of course it will require more material due to the strength i.e. more weight. So, by calculations 150 can be acceptable.
If we take 200% or 175% of course it will require more material due to the strength i.e. more weight. So, by calculations 150 can be acceptable.
Swapnil Rane said:
1 decade ago
How to increase the engine torque by clutch?
Anmol said:
1 decade ago
Clutch is not used to provide torque to engine but it is used to step up the torque which is provide by the engine.
Shubham fawade said:
10 years ago
Its for factor of safety.
Shahid said:
10 years ago
While we change the torque. What else will vary?
VRUSHANKH said:
10 years ago
It is completely basic physics. Clutch works on the principle of friction. From basic physics we have Torque = Force*Perpendicular distance. And we know that frictional force will increase upon increasing the applied force. So indirectly frictional torque will increase.
If we design a clutch for the required torque then there is a chance of slip. SO, it is designed for the higher friction.
If we design a clutch for the required torque then there is a chance of slip. SO, it is designed for the higher friction.
Ganeshbhandarkar said:
9 years ago
It is designed for transmit 150% torque for design purpose But in actual working it transmit better power.
Dhruv said:
8 years ago
How it is designed to deliver 150% torque?
Explain it.
Explain it.
Ganesh Kumar Kothalanka said:
8 years ago
For any material or design, testing = working X 1.5 times.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers