Electronics - Flip-Flops and Timers - Discussion
Discussion Forum : Flip-Flops and Timers - General Questions (Q.No. 2)
2.
When both inputs of a J-K flip-flop cycle, the output will:
Discussion:
13 comments Page 1 of 2.
AL from M.U. said:
4 years ago
Cycle = 2 x toggle.
Prashanth said:
5 years ago
When it cycles like j=1and k=0 then how it becomes no change, It becomes set condition right?
Vihari said:
1 decade ago
Toggle condition when the J-K flip flop receives the both the inputs as high and clock is also in rise edge the output of the flip flop will be changes to 0 and 1.
It will not be constant constant output for every clock cycle it will race in between 1/0/1/0.
It will not be constant constant output for every clock cycle it will race in between 1/0/1/0.
Ravikanth said:
1 decade ago
@Bhuji.
Toggle means complement.
Toggle means complement.
(1)
BHUJI said:
1 decade ago
What is meant by toggle?
(1)
Adil said:
1 decade ago
@Ravi sinha tabe is right. When they form in cycle they form in 1 & 0 so output become no change.
Guru said:
1 decade ago
@Sundar clue is correct but small changes.
After one cycle the value of each input comes to the same value
ex: Assume J=0 and K=1.
After 1 cycle, it becomes as J=0->1->0(1 cycle complete) and K=1->0->1(1 cycle complete).
So answer is B. not change o/p.
After one cycle the value of each input comes to the same value
ex: Assume J=0 and K=1.
After 1 cycle, it becomes as J=0->1->0(1 cycle complete) and K=1->0->1(1 cycle complete).
So answer is B. not change o/p.
Govind singh said:
1 decade ago
I think correct answer is toggle because at 11 position jk toggle
(1)
M.V.KRISHNA/PALVONCHA said:
1 decade ago
Why can't the answer be toggle ?
Anaya said:
1 decade ago
Then there will be change how answer is no change.
(2)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers