Civil Engineering - Highway Engineering - Discussion
Discussion Forum : Highway Engineering - Section 6 (Q.No. 2)
2.
Thickness of broken centre line markings for a four lane road, is generally kept
Discussion:
11 comments Page 1 of 2.
Vetan said:
6 years ago
For multy lane road -10cm.
(1)
Engr. Niazi said:
5 years ago
For a 4-Lane road,
Width of broken road marking = 15 cm.
Length of these markings = 1.5 m,
Distance between these markings = 3 m.
Width of broken road marking = 15 cm.
Length of these markings = 1.5 m,
Distance between these markings = 3 m.
(1)
Hari said:
4 years ago
The Correct answer is 15cm. Agree with the given answer.
(1)
Manish said:
7 years ago
10cm is the answer, 15 cm is not for four lane check this address.
Srinadh said:
7 years ago
The centre line may be single broken line segments of 3m long and 150 mm wide for 4 lane roads and these broken lines are placed with 4.5 m gaps.
Naveed said:
6 years ago
Not thickness but width kept 15cm.
Krishna said:
6 years ago
What should be the correct answer?
Vivek mishra said:
6 years ago
No, its 10 cm length 3m and gap 4.5 m.
Dpaul said:
5 years ago
On undivided urban roads with at least two traffic lanes in each direction, the centre line marking may be a single solid line of 150 mm wide and side line marking are 100 mm wide.
Durgesh Nemade said:
4 years ago
Thermoplastic paint havinh thickness only 1.8 mm.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers