Mechanical Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 2 (Q.No. 16)
16.
The extremeties of any diameter on Mohr's circle represent
Discussion:
30 comments Page 3 of 3.
DHARMJeet said:
7 years ago
According to me, D is the correct answer.
(1)
Sachin swapnil said:
7 years ago
Option A is the correct answer.
Principal stress is the correct Answer.
Extremities means diameter ends on X-axis represents max and min principal stresses so answer is definately A.
Principal stress is the correct Answer.
Extremities means diameter ends on X-axis represents max and min principal stresses so answer is definately A.
(1)
Jayesh said:
7 years ago
The correct Answer is D.
(2)
Hemraj Basnet said:
7 years ago
Any extremities of diameter pass through centre of mohr's circle so centre of mohr circle gives normal stresses on plane at 45 degree.
Spitfire said:
6 years ago
Extremities of any diameter tell us the normal stresses and shear stresses on planes at 90 degrees to each other since the diameter subtends an angle of 180 degrees = 2 * θ in Mohr's circle.
(1)
Shail said:
6 years ago
A is thw right ans.. as extremities of dia. are points of principal stresses.. since extremities means the end points of the dia. Which shows the principal stresses.. normal stress is at the point in sumwhere b/w the dia.. bt not the extremities
Nil pandya said:
5 years ago
The Correct answer should be D.
(1)
Vinay said:
5 years ago
The Correct answer should be D.
(3)
Gopi said:
4 years ago
The right Answer should be principal stresses.
Usama Ata said:
4 years ago
Right answer is B because we find sigma X and sigma why from Mohr's circle (and diameter=sigma X+ sigma y).
And shear stress is equal to radius, Not diameter.
And shear stress is equal to radius, Not diameter.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers