Mechanical Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 1 (Q.No. 34)
34.
When a bar is cooled to - 5°C, it will develop
Discussion:
106 comments Page 1 of 11.
Sanjay said:
1 month ago
The question is mostly wrong because if the bar is fixed and if we cool the bar then its tensile but here they didn't say its fixed, hinger or one side fixed, etc.
So the answer is no stress will be right.
So the answer is no stress will be right.
(1)
Phaneendra said:
3 years ago
If the bar is cooled, it will shrink. But the internal forces will resist that by producing force in opposite direction to shrinkage which means the internal forces produce tension. So the answer is tensile stress if the bar is fixed.
But here the bar is not under any restraints. So there will be no stress.
But here the bar is not under any restraints. So there will be no stress.
(11)
Ajant pandey said:
4 years ago
If the temperature of the bar is lowered, then the nature of stress & strain will be?
(1)
Ishfaq paray said:
5 years ago
Correct answer is tensile stress.
Here -5 degrees denotes that there will be an initial temperature
Thermal stress= E alpha ΔT,
ΔT= T2-T1.
If T2 is -10 degrees that means ΔT =-10-(-5)=-5 degree which means compressive,
If T2 =10 degree.
ΔT= 10-(-5)=15 which means tensile stress . So the answer will be tensile.
Here -5 degrees denotes that there will be an initial temperature
Thermal stress= E alpha ΔT,
ΔT= T2-T1.
If T2 is -10 degrees that means ΔT =-10-(-5)=-5 degree which means compressive,
If T2 =10 degree.
ΔT= 10-(-5)=15 which means tensile stress . So the answer will be tensile.
(2)
Atanu said:
5 years ago
When a bar is cooled to - 5° C, it will develop.
Actually, this question denoted 'a bar '.
It is not Mentioned as the bar is fixed, hinged, both sides fixed it. So the bar is free, not fixed and hinged.
That's why the answer is ' no stress '.
(If it is mentioned as "one side is fixed" then the answer is compressive stress generate).
Thank you.
Actually, this question denoted 'a bar '.
It is not Mentioned as the bar is fixed, hinged, both sides fixed it. So the bar is free, not fixed and hinged.
That's why the answer is ' no stress '.
(If it is mentioned as "one side is fixed" then the answer is compressive stress generate).
Thank you.
(2)
Rajesh kumar patel said:
5 years ago
The right answer is compressive stress.
And when free bar then hired then no thermal stress dovlepod.
And when free bar then hired then no thermal stress dovlepod.
(1)
Sujit Mundhe said:
6 years ago
We know that Stress means Internal Stress/Area
If bar at -5' obviously it goes to compression & hence to resist this compression tensile stress is develop in rod to get its actual length.
If bar at -5' obviously it goes to compression & hence to resist this compression tensile stress is develop in rod to get its actual length.
(2)
Santy. said:
6 years ago
When the bar is cooled. It has been prevented for expansion. So it is try to expands. So there will tensile stress is produced.
SOURABH said:
6 years ago
No stress will be developed.
Harsh said:
6 years ago
If end conditions are not given then what should we assume (fixed or free) ? Please explain me.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers