Mechanical Engineering - Production Engineering - Discussion
Discussion Forum : Production Engineering - Section 1 (Q.No. 5)
5.
Internal gears can be made by
Discussion:
37 comments Page 1 of 4.
Rambabu Yeripilli said:
3 years ago
Except for shaping with a pinion cutter above all used for external gear cutters, shaping with a pinion cutter is used for internal gear cutters.
(4)
Dhananjay Bhile said:
7 years ago
@All.
An internal gear having one side blind is produce by pinion cutter. And broaching is done on hollow internal gear. Broaching is more economical and fast then shaping by pinion cutter.
An internal gear having one side blind is produce by pinion cutter. And broaching is done on hollow internal gear. Broaching is more economical and fast then shaping by pinion cutter.
(2)
Jeet Sharma said:
8 years ago
(I) Internal gears can be produced by shaping with pinion cutter.
(II) Gears can be produced by Hobbing Process.
(III) Gears can be finished by burnishing.
(II) Gears can be produced by Hobbing Process.
(III) Gears can be finished by burnishing.
(2)
Neel said:
6 years ago
How internal gears are being made by the tapping process? Please explain it in detail.
(1)
Sreenu said:
7 years ago
Spur gear can not be made with the hobbing process. Only using with shaping with pinion cutter.
(1)
Likith said:
7 years ago
Hobbing is the right answer.
Ref: RS: Khurmi.
Ref: RS: Khurmi.
(1)
Avi said:
9 years ago
I agree with you @Saurav.
Virdi said:
9 years ago
Hobbing is a machining process for gear cutting.
Trinadharao said:
9 years ago
Internal gears can be made by?
Answer: All of these.
But specified hobbing process.
Answer: All of these.
But specified hobbing process.
Rahul said:
9 years ago
The pinion cutter is also called external gear.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers