Mechanical Engineering - Machine Design - Discussion
Discussion Forum : Machine Design - Section 1 (Q.No. 1)
1.
The sleeve or muff coupling is designed as a
Discussion:
30 comments Page 1 of 3.
SyeD said:
1 decade ago
High- pressure seamless steel gas cylinder is ideal for holding permanent gas and high pressure liquefied gas such as oxygen, hydrogen, argon and carbon dioxide. The product is widely used in chemical, metallurgical, mechanical, medical, building, shipping industries and fire- fighting system.
MANISH said:
9 years ago
This consists of a pipe whose bore is finished to the required tolerance based on the shaft size.
Based on the usage of the coupling a keyway is made in the bore in order to transmit the torque by means of the key.
Two threaded holes are provided in order to lock the coupling in position.
Based on the usage of the coupling a keyway is made in the bore in order to transmit the torque by means of the key.
Two threaded holes are provided in order to lock the coupling in position.
Manvendra said:
7 years ago
Basically, Muff Coupling use in Solid Shaft. Muff Coupling Material Basically use is Cast Iron. It is mostly used in Vertical Pump and Motor Assembly. As per my knowledge; muff Coupling is not used in the hollow shaft.
But possible it is designed for the hollow shaft.
But possible it is designed for the hollow shaft.
Vinay said:
1 decade ago
All couplings are always hallow but shaft for sleeve and muff coupling is always solid because if shaft is hollow then how do we apply key on the shaft?
For hollow shaft we always use flange coupling.
For hollow shaft we always use flange coupling.
Harsh tiwari said:
1 decade ago
From my point of view, hollow cylinder objects can handle large stress as well as forces, which are acting on it.
So that muff coupling is made up of hollow cylinder ?
So that muff coupling is made up of hollow cylinder ?
Avinash said:
1 decade ago
Split couplings are used for hollow shafts as split couplings involve only the outer surface for gripping without using any keys. Which is suitable for hollow shafts.
Vivek kumar dhanraj said:
9 years ago
Sleeve coupling is used to connect two shafts. Which two shafts has the coaxial axis? It is used to power transmission from one shaft to another.
Vasu mittal said:
1 decade ago
A Sleeve coupling is a basic type of coupling. This consists of a pipe whose bore is finished to the required tolerance based on the shaft size.
Saragayu said:
1 decade ago
The term coupling meant its used to join two mating profiles without fasteners. Zero fit locking principle. It should not be a solid shaft.
Safder said:
5 years ago
A hollow shaft with desired thickness to transmit power from one solid shaft to another solid shaft on colinear axis or coaxial.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers