Electronics - Transformers - Discussion

Discussion Forum : Transformers - General Questions (Q.No. 4)
4.
Increasing the number of turns of wire on the secondary of a transformer will
increase the secondary current
decrease the secondary current
have no effect on the secondary current
increase the primary current
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
13 comments Page 1 of 2.

Ramya Wijesundera said:   1 decade ago
The number of turns are more resistance is more so the current is less. Further, when number of turns are more generated e.m.f. is more.

Therefore, according to the equation P=VI, secondary I (current) should be less than primary current because power is not increasing.

Vijay kumar said:   1 decade ago
We know that in a transformer,
Ns/Np = Ip/Is.
From the above relation, The relation btwn no.of turns and current is inversely propotional to each other.

Avinash said:   1 decade ago
In this case the ratio Ip/Is will increase but it will not affect the primary current as no.of turns in the primary is same.

Malik said:   10 years ago
If we give 220 on primary 100 turns and we take from secondary 110 and what should be no of turns of secondary winding.

Veera said:   1 decade ago
The work of resistance is its oppose the current. So only resistance is increasing means current is decreasing.

Purnima said:   1 decade ago
If no of turn is increase then the resistance is also increases thats why the current is decreases.

Buba said:   8 years ago
Answer incorrect, without load increasing turns of secondary doesn't change any current.

Velan said:   1 decade ago
Es/Ep = Ns/Np = Ip/Is

V increase I decrease
N(no of turns) increase V increase

Sukumar said:   1 decade ago
I think this effect the primary current in the form of increasing.

Am I right?

Jeet said:   1 decade ago
Because I is inversely proportional to no. of turns.


Post your comments here:

Your comments will be displayed after verification.