Civil Engineering - Surveying - Discussion
Discussion Forum : Surveying - Section 7 (Q.No. 10)
10.
If the whole circle bearing of a line is 270°, its reduced bearing is
Discussion:
33 comments Page 1 of 4.
Nayan said:
2 years ago
Both A and B are correct.
If the line is along the north direction it is mentioned as N0° or due north.
If the line is along the south direction it is mentioned as S0° or due south.
If the line is along the east direction it is mentioned as N90°E or S90°E or due east.
If the line is along the west direction it is mentioned as N90°W or S90°W or due west.
In ques, it is given 270° means west direction.
If the line is along the north direction it is mentioned as N0° or due north.
If the line is along the south direction it is mentioned as S0° or due south.
If the line is along the east direction it is mentioned as N90°E or S90°E or due east.
If the line is along the west direction it is mentioned as N90°W or S90°W or due west.
In ques, it is given 270° means west direction.
(2)
Ratan Kumar said:
2 years ago
Let us assume, WBC=30°, We can say In Reduced bearing is = N 30° E.
Another one assumes WBC=60°, can say in reduced bearing= E 30° N.
So, we can see which quadrant is nearest the angle is first written on a paper then the degree then the direction.
Hence, according to the question, the nearest is exact on W 90°.
Another one assumes WBC=60°, can say in reduced bearing= E 30° N.
So, we can see which quadrant is nearest the angle is first written on a paper then the degree then the direction.
Hence, according to the question, the nearest is exact on W 90°.
(1)
Jayraj Khatri said:
6 years ago
Answer is C
If you see from both references N and S than it is same so confusion occurs.
If you write 90 W then it will be same as showing declination.
Due to this, all reason at this point answer is W 90.
Similarly,
0° = N 0,
180° = S 0,
90° = E 90,
270° = W 90.
If you see from both references N and S than it is same so confusion occurs.
If you write 90 W then it will be same as showing declination.
Due to this, all reason at this point answer is W 90.
Similarly,
0° = N 0,
180° = S 0,
90° = E 90,
270° = W 90.
Ajju said:
2 years ago
Reduced bearing is always from the closest north or south, but in this case, N90W and S90W both are equidistant so option A and B is rejected. When we don't take reference either from north or south, we have to specify W but with W90 is given in option So we go for option C.
MrGuru said:
4 years ago
The Correct answer is D.
Because wcb 270 Means QB is S 90 W.
QB is measured by N and S side. That's N 90 W, and S 90 W.
Than 90 W is common.
The answer is 90 W.
Because wcb 270 Means QB is S 90 W.
QB is measured by N and S side. That's N 90 W, and S 90 W.
Than 90 W is common.
The answer is 90 W.
(2)
Rohit said:
6 years ago
360-270=90.
As the 270 lies on exact quadrant line i.e 270.
So it is W only, not even in third and fourth quadrant.
Hence, option C and D are correct.
As the 270 lies on exact quadrant line i.e 270.
So it is W only, not even in third and fourth quadrant.
Hence, option C and D are correct.
Vijet said:
4 years ago
I think, options A) &B) is right. I know that in QB system to measure the angle of any line from north meridian and South meridian.
Mr.Guru said:
4 years ago
The Correct ans is D.
Because 270 means S 270 W.
Because wcb is always respect to N side measure.
The correct format are 90 W.
Because 270 means S 270 W.
Because wcb is always respect to N side measure.
The correct format are 90 W.
Venkat said:
5 years ago
Correct @Jayraj.
Because in reduced bearings are done by surveyor compass.
S = 0.
W = 90.
N = 0.
E = 90.
Because in reduced bearings are done by surveyor compass.
S = 0.
W = 90.
N = 0.
E = 90.
Kajack said:
4 years ago
The whole circle nearing of a line is 300 degree. It's Quadrantal bearing, right?
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers