Civil Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 4 (Q.No. 4)
4.
A rectangular log of wood is floating in water with a load of 100 N at its centre. The maximum shear force in the wooden log is
Discussion:
23 comments Page 2 of 3.
MD DANISH NAYEEM said:
5 years ago
A is correct.
Because at the centre sF is zero.
Because at the centre sF is zero.
Civise said:
5 years ago
How do guys consider the udl of water is 50? Please explain it detail.
Anuj j said:
5 years ago
@Civise.
Because the log is floating. So forces are balancing each other. That's why.
Because the log is floating. So forces are balancing each other. That's why.
(1)
Sanat kumar said:
4 years ago
50 N at center will be the correct answer.
Prakash said:
4 years ago
Water exerts a resisting force equal to the applied point load of 100 N in the form of UDL over the whole span.
Let's say, the span is 10m long then, W=10N/M.
Now, the beam is loaded with UDL of 10N/M in an upward direction and a point load at the center.
From the SF diagram maximum shear 50N at the center.
Let's say, the span is 10m long then, W=10N/M.
Now, the beam is loaded with UDL of 10N/M in an upward direction and a point load at the center.
From the SF diagram maximum shear 50N at the center.
(2)
Batt said:
4 years ago
50N at centre is the correct answer.
(1)
Gopal Chaudhary said:
3 years ago
According to me, 50 N at center is the right answer.
Because there are applied to Beyonce's force.
Because there are applied to Beyonce's force.
(1)
Sanchet joshi said:
3 years ago
50 at each end.
Because shear force acts at the ends of the beam a.
Because shear force acts at the ends of the beam a.
Kamlesh Kumar said:
3 years ago
50 N at the centre is the right answer.
(2)
Pushpesh Prajapati said:
3 years ago
I think B is the right answer.
(2)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers