Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 2 (Q.No. 41)
41.
If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than
Discussion:
37 comments Page 4 of 4.
Pramit Samanta said:
5 years ago
It's minimum 6mm or d/4.
Maloth Praveen said:
5 years ago
The answer is d/4 i.e 6mm each one is least.
16/4=4.
So the answer is 4mm.
16/4=4.
So the answer is 4mm.
Purushottam kumar said:
5 years ago
We know minimum dia of stirrups bar in a column is least of the following (d/4 or 6mm).
So here dia of stirrups is 6mm.
So here dia of stirrups is 6mm.
Jero M said:
2 years ago
The diameter of lateral ties should be greater of d/4; or 6mm.
16/4= 4mm, in this case, 6mm is greater,
So, the given answer is correct.
16/4= 4mm, in this case, 6mm is greater,
So, the given answer is correct.
(4)
Suhil said:
2 years ago
It should be 1/4 dia.of main bar or 6mm which is the maximum.
(4)
Pamu said:
1 year ago
Guys, the correct one is 6mm.
Vishal said:
1 year ago
If the diameter of the longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than 6 mm. This is because the diameter of lateral ties should be greater of d/4 or 6 mm, whichever is greater.
In this case, d/4 is 16/4 = 4 mm, which is less than 6 mm, so the diameter of lateral ties should be 6 mm.
In this case, d/4 is 16/4 = 4 mm, which is less than 6 mm, so the diameter of lateral ties should be 6 mm.
(1)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers