Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 2 (Q.No. 41)
41.
If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than
Discussion:
37 comments Page 1 of 4.
Vishal said:
12 months ago
If the diameter of the longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than 6 mm. This is because the diameter of lateral ties should be greater of d/4 or 6 mm, whichever is greater.
In this case, d/4 is 16/4 = 4 mm, which is less than 6 mm, so the diameter of lateral ties should be 6 mm.
In this case, d/4 is 16/4 = 4 mm, which is less than 6 mm, so the diameter of lateral ties should be 6 mm.
(1)
Pamu said:
1 year ago
Guys, the correct one is 6mm.
Suhil said:
2 years ago
It should be 1/4 dia.of main bar or 6mm which is the maximum.
(4)
Jero M said:
2 years ago
The diameter of lateral ties should be greater of d/4; or 6mm.
16/4= 4mm, in this case, 6mm is greater,
So, the given answer is correct.
16/4= 4mm, in this case, 6mm is greater,
So, the given answer is correct.
(4)
Purushottam kumar said:
5 years ago
We know minimum dia of stirrups bar in a column is least of the following (d/4 or 6mm).
So here dia of stirrups is 6mm.
So here dia of stirrups is 6mm.
Maloth Praveen said:
5 years ago
The answer is d/4 i.e 6mm each one is least.
16/4=4.
So the answer is 4mm.
16/4=4.
So the answer is 4mm.
Pramit Samanta said:
5 years ago
It's minimum 6mm or d/4.
Vikrant said:
6 years ago
Minbar available is 8mm. So it would be 8mm.
(2)
Engr Omid said:
6 years ago
The given answer is correct, Because the lateral ties dia is one-fourth of longitudinal bar dia..so here 1/4 *16=4 mm.
The imp condition is that it should be not less than 5mm according to Khurmi book..so answer is 5mm.
The imp condition is that it should be not less than 5mm according to Khurmi book..so answer is 5mm.
(1)
Bittu said:
6 years ago
The correct Answer is C) 6mm.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers