Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 1 (Q.No. 49)
49.
The effective width of a column strip of a flat slab, is
Discussion:
14 comments Page 1 of 2.
Sahla said:
4 years ago
1 column strip =L/4.
There are 2 column strips on one side.
So we take column strips=2 * L/4=L/2.
So, the given is the correct answer.
There are 2 column strips on one side.
So we take column strips=2 * L/4=L/2.
So, the given is the correct answer.
(2)
Madhu1304 said:
8 years ago
Answer is correct. Refer 31.2.2, it is half the width of panel (drop panel), not slab width.
(1)
Rakesh said:
5 years ago
@Hardik.
Right, I am agree with you.
Right, I am agree with you.
(1)
Satyandra gangoli said:
1 decade ago
What is the difference between column and pillar?
S.R.Elamurugan said:
10 years ago
In IS456 - 2000 Clause 31.1.1 - a
Column strip - Column strip means a design strip having a width of 0.2S '2, but not greater than 0.25' on each side of the column centreline, where I. is the span in the direction moments are being determined, measured centre to centre of supports and '2 is the span transverse
Column strip - Column strip means a design strip having a width of 0.2S '2, but not greater than 0.25' on each side of the column centreline, where I. is the span in the direction moments are being determined, measured centre to centre of supports and '2 is the span transverse
Keshav Raidas said:
8 years ago
For 1 strip I think l/4.
Nirmal said:
8 years ago
As per In IS456 - 2000 Clause 31.1.1.
We have to take column strip is 0.25L2 but not less than 0.25L1.
That means if you do (1/4)L1 or (1/4)L2 = 0.25 * length of panel.
I think the correct answer is [A].
We have to take column strip is 0.25L2 but not less than 0.25L1.
That means if you do (1/4)L1 or (1/4)L2 = 0.25 * length of panel.
I think the correct answer is [A].
Devid said:
7 years ago
I agree, option B is correct.
Viru kapoor said:
7 years ago
As per 1956:2000.
The effective width of a column strip of a flat slab is taken as half the width of the panel.
The effective width of a column strip of a flat slab is taken as half the width of the panel.
Meena said:
6 years ago
I think the correct answer is A. L/4.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers