Civil Engineering - Concrete Technology - Discussion
Discussion Forum : Concrete Technology - Section 2 (Q.No. 17)
17.
Water required per bag of cement, is
Discussion:
45 comments Page 2 of 5.
Rajesh thakur said:
9 years ago
@All.
This Question had been asked SSC(JE) and in that key the answer is 28.
Please tell me, which is the correct answer.
This Question had been asked SSC(JE) and in that key the answer is 28.
Please tell me, which is the correct answer.
Nasim said:
2 years ago
The normal range for the amount of water used to mix each 50 kg bag of cement is between 20 liters and 30 liters.
Rupesh Hunde said:
10 years ago
Water requires= (45% of cement+25% of filling gel pores).
Water requires= (45%*50 + 25%*50) =35 kg/litre.
Water requires= (45%*50 + 25%*50) =35 kg/litre.
Sami ullah said:
7 years ago
For a general purpose, w/c ratio is .45.
So, water required for 1 bag of cement (=50kg) is 22.5 ltrs.
So, water required for 1 bag of cement (=50kg) is 22.5 ltrs.
Mohit kumar said:
6 years ago
In the process of hydration of OPC. What is the water requirement to complete the chemical reaction ?
(1)
Er. Rakesh Siwach said:
10 years ago
Maximum W/C Ratio = 0.7.
Minimum W/C Ratio = 0.2.
The result for maximum w/c ratio is 35 kg/bag.
Minimum W/C Ratio = 0.2.
The result for maximum w/c ratio is 35 kg/bag.
Aesthetic said:
7 years ago
Simple, the unit should be in litres not kg so the answer is correct, only it should be in litres.
Sandip said:
1 decade ago
I am confused with question, water required per bag of cement? for what, is it concrete or mortar.
Hardik parmar said:
1 decade ago
Could anyone explain about this because min w/c ratio is 0.22 required with reaction of cement.
Srikumar said:
5 years ago
Minimum water cement ratio is 0.45.
with that 50kg(1bag) x 0.45= 22.5 is the correct answer.
with that 50kg(1bag) x 0.45= 22.5 is the correct answer.
(6)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers