Civil Engineering - Building Materials - Discussion
Discussion Forum : Building Materials - Section 1 (Q.No. 12)
12.
The clay to be used for manufacturing bricks for a large project, is dugout and allowed to weather throughout
Discussion:
21 comments Page 1 of 3.
Monica Prakash said:
9 years ago
In monsoon season the moisture content of the clay will not get that much affected, it will be maintained in the same condition while comparing with summer & winter season as we know as in summer the moisture content of the soil get decreased and vice-versa in winter. So bricks are manufactured in monsoon.
Ranjit said:
6 years ago
The purpose of weathering is to soften and loosen the clay so that the moulding process will be easier. Rain water and high natural moisture content in monsoon is the best season for it.
After weathering the depleted minerals from clay are restored in the process of blending.
After weathering the depleted minerals from clay are restored in the process of blending.
(3)
Khuzaifa Ahmad said:
6 years ago
I think it's two reasons.
1) Due to time and money, In monsoon, the pressure of wind is so much high that dry the kacha brick more rapidly.
2) In monsoon, the air contain more moisture contents, which inter in the brick causing more hardness and strength.
1) Due to time and money, In monsoon, the pressure of wind is so much high that dry the kacha brick more rapidly.
2) In monsoon, the air contain more moisture contents, which inter in the brick causing more hardness and strength.
(1)
Civil era said:
7 years ago
Weathering of brick is done in monsoon because due to raining the bebris and some organic material are removed from the soil. Due to directly exposed of soil in the atmosphere the decomposition of organic material takes place also.
(1)
Krrish said:
5 years ago
This answer is based on Bulls trench kiln used for brick burning.
This kiln not works in mansoon due to non permanent roof.
So in mansoon clay prepared and in other season manufacturing starts.
This kiln not works in mansoon due to non permanent roof.
So in mansoon clay prepared and in other season manufacturing starts.
Siri said:
4 years ago
Why the weathering is preferred in monsoon because of the condition of atmosphere is some amount of humidity so while Weathering the clay there is no loss of water.
(1)
Binay said:
8 years ago
Seems logical. Time and money can be saved by leaving the rain water to moisten the clay instead of fetching the water from an external source.
Arjun said:
1 decade ago
It will get loosed their binding capacity right if we allowed clay in the whole mansion, & for what purpose we need to do like this ?
Jayanta said:
1 decade ago
By using moisture from the atmosphere its get more harden and in monsoon moisture quantity in air are higher than other season.
Manu said:
6 years ago
I think moisture present in clay doesn't sink and other time clay should be hard and crack form in the surface the of clay.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers