Civil Engineering - Building Materials - Discussion

Discussion Forum : Building Materials - Section 1 (Q.No. 1)
1.
In a mortar, the binding material is
cement
sand
surkhi
cinder.
Answer: Option
Explanation:
A mortar is a mixture of binding material, water, and fine aggregate (such as sand or surkhi). The binding material is typically cement, which is a powder made of a mixture of calcined limestone and clay. When mixed with water, cement forms a paste that hardens over time to bind the aggregate together and create a strong and durable building material. Sand and surkhi are both types of fine aggregate that are often used in mortars, and cinder is a type of coarse aggregate that is not typically used in mortars.
Discussion:
117 comments Page 8 of 12.

(MANUU) Md sanauar ansari said:   10 years ago
As you know that, good a binding material. But When the pasts prepared by mixing cement, sand, fine and course aggregates in suitable proportion and addition to water is called concrete used for R.C.C works.

ASHRUF said:   9 years ago
A cement is a binder, a substance that sets and hardens and can bind other materials together.

Clement said:   9 years ago
Mortar is consist of a mixture of cements with fine sand.

Ashik Islam said:   9 years ago
Mortar is a composition which is made by cement, aggregate, water. Materials are in the proper ratio.

Titu said:   9 years ago
Cement is the heart of the mortar.

Ankushrai said:   9 years ago
Cement is used in mortar because of its binding property.

Pks said:   9 years ago
Cement acts as a binding material first forming a paste and later gets hardened.

Shujaath said:   9 years ago
In a mortar the cement is absolute binding material because it has the aggregates gives the strength and sand are used for the filling of the gap between empty space so by this it gives the better finishing.

Kishion singh said:   9 years ago
Yes, the cement is a most binding material.

Pankaj barwal said:   9 years ago
Lacquer is a clear or colored wood finish that dries by solvent evaporation or a curing process that produces a hard, durable finish. This finish can be of any sheen level from ultra matter to a high gloss, and it can be further polished as required.


Post your comments here:

Your comments will be displayed after verification.