Civil Engineering - Building Construction

6. 

Stud(s) of a common wooden partition

A. are vertical wooden members
B. is the upper horizontal wooden member
C. is the lower horizontal wooden member
D. are the intermediate horizontal wooden members.

Answer: Option A

Explanation:

No answer description available for this question. Let us discuss.

7. 

Pick up the correct statement from the following :

A. inclined borings are made for taking samples under existing structures
B. inclined borings are occasionally used instead of vertical holes.
C. the spacing of inclined borings is kept such that one bore hole is vertically above the bottom of an adjacent bore hole.
D. all the above.

Answer: Option D

Explanation:

No answer description available for this question. Let us discuss.

8. 

Pick up the commonly adopted geophysical method in civil engineering from the following :

A. the seisomic method
B. electrical resistivity method
C. gravitational method
D. magnetic method
E. both (a) and (b) of the above.

Answer: Option E

Explanation:

No answer description available for this question. Let us discuss.

9. 

To ensure that supporting area of an offset footing of a boundary wall is fully compressive, the C.G. of load must act

A. at the centre of the base
B. within the middle third of the base
C. within the middle fifth of the base
D. neither (a), (b) nor (c).

Answer: Option B

Explanation:

No answer description available for this question. Let us discuss.

10. 

The 9 cm x 9 cm side of a brick as seen in the wall face, is generally known as

A. stretcher
B. face
C. front
D. header
E. side.

Answer: Option D

Explanation:

No answer description available for this question. Let us discuss.