Chemical Engineering - Chemical Engineering Basics
Exercise :: Chemical Engineering Basics - Section 20
1. |
The instrument based on the following principle is used for the measurement of oxygen only in the flue gases. |
A. |
Chemical absorption. | B. |
Thermal conductivity. | C. |
Infrared absorption. | D. |
Paramagnetism. |
Answer: Option D
Explanation:
|
2. |
Work study deals with the __________ study. |
A. |
time | B. |
motion | C. |
both (a) & (b) | D. |
neither (a) nor (b) |
Answer: Option C
Explanation:
|
3. |
Maximum change in the hardness of mar tensite occurs in the carbon content range of __________ percent in steel. |
A. |
0.01 to 0.10 | B. |
0.2 to 0.4 | C. |
0.5 to 0.7 | D. |
0.8 to 1.0 |
Answer: Option B
Explanation:
|
4. |
Knocking tendency in a petrol engine decreases with increasing |
A. |
supercharging | B. |
compression ratio | C. |
wall temperature | D. |
engine speed |
Answer: Option D
Explanation:
|
5. |
Hooke's law |
A. |
applies to elastic deformation. | B. |
applies beyond limit of proportionality in stress-strain curve. | C. |
states that stress is inversely proportional to strain upto elastic limit. | D. |
noneofthese. |
Answer: Option A
Explanation:
|