IndiaBIX

Networking - IOS and Security Device Manager

Why should I learn to solve Networking questions and answers section on "IOS and Security Device Manager"?

Learn and practise solving Networking questions and answers section on "IOS and Security Device Manager" to enhance your skills so that you can clear interviews, competitive examinations, and various entrance tests (CAT, GATE, GRE, MAT, bank exams, railway exams, etc.) with full confidence.

Where can I get the Networking questions and answers section on "IOS and Security Device Manager"?

IndiaBIX provides you with numerous Networking questions and answers based on "IOS and Security Device Manager" along with fully solved examples and detailed explanations that will be easy to understand.

Where can I get the Networking section on "IOS and Security Device Manager" MCQ-type interview questions and answers (objective type, multiple choice)?

Here you can find multiple-choice Networking questions and answers based on "IOS and Security Device Manager" for your placement interviews and competitive exams. Objective-type and true-or-false-type questions are given too.

How do I download the Networking questions and answers section on "IOS and Security Device Manager" in PDF format?

You can download the Networking quiz questions and answers section on "IOS and Security Device Manager" as PDF files or eBooks.

How do I solve Networking quiz problems based on "IOS and Security Device Manager"?

You can easily solve Networking quiz problems based on "IOS and Security Device Manager" by practising the given exercises, including shortcuts and tricks.

Exercise : IOS and Security Device Manager - IOS and Security Device Manager
  • IOS and Security Device Manager - IOS and Security Device Manager
1.
Which of the following commands sets the secret password to Cisco?
enable secret password Cisco
enable secret cisco
enable secret Cisco
enable password Cisco
Answer: Option
Explanation:
The enable secret password is case sensitive, so the second option is wrong. To set the enable secret <password>, use the enable secret <password> command from global configuration mode.
2.
You type the following command into the router and receive the following output: 
Router#show serial 0/0
        ^
% Invalid input detected at '^' marker.
Why was this error message displayed?
You need to be in privileged mode.
You cannot have a space between serial and 0/0.
The router does not have a serial0/0 interface.
Part of the command is missing.
Answer: Option
Explanation:
You can view the interface statistics from user mode, but the command is show interface serial 0/0.
3.
Which of the following commands will display the current IP addressing and the layer 1 and 2 status of an interface?
  1. show version
  2. show protocols
  3. show interfaces
  4. show controllers
  5. show ip interface
1, 2 and 4
2, 3 and 5
3 and 4 only
None of the above
Answer: Option
Explanation:
The commands show protocols, show interfaces, and show ip interface will show you the layer 1 and 2 status and the IP addresses of your router's interfaces.
4.
You type show running-config and get this output: 
[output cut]
Line console 0
    Exec-timeout 1 35
    Password BIXPASSWD
    Login
[output cut]
What do the two numbers following the exec-timeout command mean?
If no command has been typed in 35 seconds, the console connection will be closed.
If no router activity has been detected in 1 hour and 35 minutes, the console will be locked out.
If no commands have been typed in 1 minute and 35 seconds, the console connection will be closed.
If you're connected to the router by a Telnet connection, input must be detected within 1 minute and 35 seconds or the connection will be closed.
Answer: Option
Explanation:
The exec-timeout command is set in minutes and seconds.
5.
What layer of the OSI model would you assume the problem is in if you type show interface serial 1 and receive the following message? "Serial1 is down, line protocol is down."
Physical layer
Data Link layer
Network layer
None. It is a router problem.
Answer: Option
Explanation:
If you see that a serial interface and the protocol are both down, then you have a Physical layer problem. If you see serial1 is up, line protocol is down, then you are not receiving (Data Link) keepalives from the remote end.
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers