Mechanical Engineering - Production Engineering - Discussion
Discussion Forum : Production Engineering - Section 1 (Q.No. 25)
25.
The method of grinding used to produce a straight or tapered surface on a workpiece, is
Discussion:
13 comments Page 1 of 2.
Yogesh T. said:
8 years ago
Ans: (C).
Both internal and external cylindrical grinding is used to produce straight or tapered surface. But as it is mentioned in question straight/tapered grinding is to produce 'on' the workpiece, external cylindrical grinding is correct.
Both internal and external cylindrical grinding is used to produce straight or tapered surface. But as it is mentioned in question straight/tapered grinding is to produce 'on' the workpiece, external cylindrical grinding is correct.
Banty said:
1 decade ago
And is right as by this method we can create external or internal holes or tapers and by surface grinding only flat surface can be produced and form grinding for grind gear splines or threads teeth.
Aripaka Manikanta said:
4 years ago
No @ Shiv.
Because the tapering and straightening is produced on the external face of the workpiece. So you are wrong. The correct answer is External Cylindrical Grinding is not done in internally.
Because the tapering and straightening is produced on the external face of the workpiece. So you are wrong. The correct answer is External Cylindrical Grinding is not done in internally.
Jig said:
10 years ago
Question is about producing straight or taper surfaces, it isn't mentioned in question that, on what kind of object i.e. cylindrical or rectangular.
Arvind said:
1 decade ago
Surface grinding uses a rotating abrasive wheel to remove material, creating a flat surface. So surface grinding is not true.
Anil chandu said:
6 years ago
Form Grinding is a specialized type of centerless grinding where the grinding wheel is the exact shape of the final product.
Shiva said:
1 decade ago
External cylindrical grinding is use to grind cylindrically (external surface).
Surface grinding is answer.
Surface grinding is answer.
John Sebastian said:
8 years ago
An external abrasive roll is used without movement, this type of tapering is for bronze nipples (metallic).
L.bharath said:
1 decade ago
Which is the correct answer? whether External cylindrical grinding or Surface grinding?
Swami said:
1 decade ago
Surface grinding is only for flat surfaces. I think form grinding for tapered surfaces.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers