Mechanical Engineering - Engineering Mechanics - Discussion
Discussion Forum : Engineering Mechanics - Section 5 (Q.No. 9)
9.
In a single threaded worm and worm wheel, the number of teeth on the worm is 50. The diameter of the effort wheel is 100 mm and that of load drum is 50 mm. The velocity ratio is
Discussion:
11 comments Page 1 of 2.
Rishabh said:
6 years ago
LT/r, where L= radius of the wheel,
T = no.of teeth in worm wheel,
r = radius of load drum.
50*50/25.
2500/25.
= 100.
T = no.of teeth in worm wheel,
r = radius of load drum.
50*50/25.
2500/25.
= 100.
(2)
Vinay BEL said:
5 years ago
V.R = nD/D-d.
= 50*100/100-50.
= 100.
= 50*100/100-50.
= 100.
(2)
Patel Hitesh said:
1 decade ago
V.R = nD/D-d
= 50*100/100-50.
= 100.
= 50*100/100-50.
= 100.
(1)
KAUSHIK said:
2 years ago
HERE,
VR = DT/2r
= 100 * 50/2 * 50
= 50.
VR = DT/2r
= 100 * 50/2 * 50
= 50.
(1)
Piyush savaliya said:
1 decade ago
Vr = RT/nr.
= 100*50/50.
= 100.
= 100*50/50.
= 100.
Sanjay patel said:
9 years ago
As per system of pulley,
VR = Distance moved by effort/Distance moved by the load.
= PI * D * T/pi * d * t.
= 100 * 50/50.1.
= 100.
VR = Distance moved by effort/Distance moved by the load.
= PI * D * T/pi * d * t.
= 100 * 50/50.1.
= 100.
Suranjan said:
8 years ago
V.R = teeth on worm gear/no. Of thread.
T of worm/ T of worm gear = D of worm/D of worm gear.
50/T.w.g= 50/100,
T.w.g = 100,
V.R = 100/1= 100.
T of worm/ T of worm gear = D of worm/D of worm gear.
50/T.w.g= 50/100,
T.w.g = 100,
V.R = 100/1= 100.
RAGHAVENDRA REDDY said:
8 years ago
V.R=distance moved by P(effort)/distance moved by W(load).
V.R=2*L/2*r/T=LT/r=50*50/25=100.
V.R=2*L/2*r/T=LT/r=50*50/25=100.
Uttu don said:
7 years ago
D/d.
100/50 = 2,
2*50 = 100.
100/50 = 2,
2*50 = 100.
Praba said:
4 years ago
Here Vr = DT/2r.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers