Mechanical Engineering - Automobile Engineering - Discussion
Discussion Forum : Automobile Engineering - Section 5 (Q.No. 38)
38.
The connecting rod lower end is connected to the relevant __________ of crankshaft.
Discussion:
8 comments Page 1 of 1.
Prathm said:
3 years ago
The bigger end is not directly connected to the crank arm. In between that, there is a bearing called Journal Bearing. So, the answer is correct from my point of view.
Ousman ahmed said:
5 years ago
The answer is crank arm.
Prateek said:
7 years ago
Small end attaches to the piston pin, gudgeon pin or wrist pin, which is currently most often press fit into the connecting rod but can swivel in the piston, a "floating wrist pin" design. The big end connects to the crankpin (bearing journal) on the crank throw.
Yogesh reddy said:
7 years ago
Journal is wrong answer. Small end is connected to the piston (top) and big end is connected to crank arm (bottom).
Kaushik said:
8 years ago
It should be crank pin or crank arm.
Ankur said:
8 years ago
Big end should be the correct answer.
Abhishek Vij said:
9 years ago
Crank arm should be the correct answer.
Thiyagarajan said:
9 years ago
The small end connected to pistion, and the big end connected to the crankshaft.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers