Electronics - Transformers - Discussion
Discussion Forum : Transformers - General Questions (Q.No. 5)
5.
What is the turns ratio of the transformer needed to match a 1 k
source resistance to a 160 load?
source resistance to a 160 load?Discussion:
30 comments Page 2 of 3.
Nidhi said:
9 years ago
Please tell the accurate answer. I am getting confused.
Ajinkya said:
9 years ago
I think that here is the question about the secondary side of the transformer i.e. the secondary resistance of the coil means source resistance and when any resistance is connected across the source resistance is called load resistance.
Please suggest me, if I'm wrong.
Please suggest me, if I'm wrong.
Guarav Yadav said:
1 decade ago
As transformer also used in Impedance Matching,
As we have relation square root (Zp/Zs) = Np/Ns.
Given Zp = 1000 ohm and Zs = 160 ohm then.
Np/Ns = Square root (1000/160) 2.5 : 1.
As we have relation square root (Zp/Zs) = Np/Ns.
Given Zp = 1000 ohm and Zs = 160 ohm then.
Np/Ns = Square root (1000/160) 2.5 : 1.
Kamlesh kunar said:
1 decade ago
Np/Ns = (Zp/Zs)2.
Ranger said:
1 decade ago
Vs/Vp = Ns/Np.
Ravisha said:
1 decade ago
What is the relation of voltage and turns in transformer?
Sarika Rajesh Banda said:
1 decade ago
N = sqrt(Z1/Z2).
Where,
N = turns ratio
Z1 = Primary impedance
Z2 = Secondary impedance
Answer is A.
Where,
N = turns ratio
Z1 = Primary impedance
Z2 = Secondary impedance
Answer is A.
Ramjas said:
1 decade ago
Answer is A because n1/n2 = square root(z1/z2).
So Turn ratio is, n1 : n 2 = 2.5 : 1.
Where n1 = No.of primary turns.
n2 = No.of secondary turns.
z1 = Primary impedance.
z2 = Secondary impedance.
So Turn ratio is, n1 : n 2 = 2.5 : 1.
Where n1 = No.of primary turns.
n2 = No.of secondary turns.
z1 = Primary impedance.
z2 = Secondary impedance.
Raja said:
1 decade ago
Answer is B because v1^2/r1=v2^2/r2 assuming 100% efficiency.
So (v2/v1 = (r2/r1) ^0. 5 = k = 0.4:1.
So (v2/v1 = (r2/r1) ^0. 5 = k = 0.4:1.
Avinash said:
1 decade ago
Correct answer is A as
(Np/Ns) ^2=Zp/Zs.
(Np/Ns) ^2=Zp/Zs.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers