Electronics - Parallel Circuits - Discussion
Discussion Forum : Parallel Circuits - General Questions (Q.No. 13)
13.
If a 1 k
and a 2 k
resistor are parallel-connected across a 12 V supply, how much current is received by the 2 k
resistor?



Discussion:
28 comments Page 3 of 3.
RASHMI said:
1 decade ago
The voltage through both the resistors are same but the current divides.
According to KCL (the algebraic sum of all the individual current is 0). Therefore the current through R2=6mA.
According to KCL (the algebraic sum of all the individual current is 0). Therefore the current through R2=6mA.
Armandwish said:
10 years ago
If 2k resistor connected 1st i.e. beside of voltage source then answer will be 18.
Kiran.kk said:
10 years ago
I = V/R.
R1 = 1 kohm.
R2 = 2 kohm.
Their four r2 = 12/2 = 6 ma.
R1 = 1 kohm.
R2 = 2 kohm.
Their four r2 = 12/2 = 6 ma.
(1)
Lakshmi prasanna said:
10 years ago
Voltage is same in parallel circuit so directly 12/2k = 6 mA.
Yogash joshi said:
9 years ago
I = I1 + I2.
I = V/R.
1/R = 1/R1 + 1/R2.
1/R = 1 + 1/2 = 3/2, So R = 2/3.
NOW I = V/R SO, I = 12/ (2/3) = 18.
AND I1= V/ R1 = 12/ 1= 12.
SO IN EQUATION 1.
I = I1 + I2.
18 = 12 + I2.
SO, I2 = 18 - 12 = 6mA.
I = V/R.
1/R = 1/R1 + 1/R2.
1/R = 1 + 1/2 = 3/2, So R = 2/3.
NOW I = V/R SO, I = 12/ (2/3) = 18.
AND I1= V/ R1 = 12/ 1= 12.
SO IN EQUATION 1.
I = I1 + I2.
18 = 12 + I2.
SO, I2 = 18 - 12 = 6mA.
Souvik said:
8 years ago
Circuit current = V/R = 12/(2/3) = 18mA Current through the 2k resistor = total current*opposite site resistor/ sum of the two resistors. that is equal to 18*1/(2+1) = 6mA.
Faizan said:
7 years ago
Here using current divider you can easily find.
Since 1KOhm||2KOhm.
therefore Req=2/3 KOhm.
now using Ohm's law.
I=V/R.
we get I=m18A.
So current in 2KOhm = (1*18)/(1+2)=6mA.
Since 1KOhm||2KOhm.
therefore Req=2/3 KOhm.
now using Ohm's law.
I=V/R.
we get I=m18A.
So current in 2KOhm = (1*18)/(1+2)=6mA.
(1)
Arjun said:
7 years ago
I = V/R.
I = 12/1+12/2,
In this 12/2 stands for the 2KOhm resistor.
So it is 6mA.
I = 12/1+12/2,
In this 12/2 stands for the 2KOhm resistor.
So it is 6mA.
(1)
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers