Electronics and Communication Engineering - Networks Analysis and Synthesis - Discussion
Discussion Forum : Networks Analysis and Synthesis - Section 1 (Q.No. 3)
3.
An RLC series circuit is underdamped. To make it overdamped, the value of R
Answer: Option
Explanation:
For overdamping R is more.
Discussion:
18 comments Page 1 of 2.
RISHI NIGAM said:
3 years ago
For series Q = 1/R √L/C.
And, DAMPING RATIO IS REVERSE OF 2Q from there you can see that to decrease the damping ratio you have to increase and decrease respectively.
And, DAMPING RATIO IS REVERSE OF 2Q from there you can see that to decrease the damping ratio you have to increase and decrease respectively.
(1)
Shivam said:
4 years ago
Thank you everyone for explaining.
(1)
Pravallika said:
7 years ago
It may be like this;
(R/2)^2<L/C.
(R/2)^2=L/C.
(R/2)^2>L/C.
(R/2)^2<L/C.
(R/2)^2=L/C.
(R/2)^2>L/C.
(1)
K.panda said:
7 years ago
Underdamped-------------- (R/2L)^2 < 1/LC.
critical damped------------- (R/2L)^2 = 1/LC.
overdamped--------------- (R/2L)^2 > 1/LC.
To make underdamped to overdamped for RLC series circuit the value of R should be increased.
critical damped------------- (R/2L)^2 = 1/LC.
overdamped--------------- (R/2L)^2 > 1/LC.
To make underdamped to overdamped for RLC series circuit the value of R should be increased.
(2)
Swetha said:
8 years ago
Please give the formula for damping ratio.
(1)
Aishu.M said:
8 years ago
Can anyone say the formula for damping ratio?
Shubham panwar said:
8 years ago
Underdamped in this damping ratio is between 0 and 1. Over damped damping ratio is greater than 1. Critically damped damping ratio is 1.
(1)
Manimala said:
8 years ago
During this, over damped condition L and C are more or less?
Ramana said:
8 years ago
What is the difference between underdamped, overdamped, critical damped?
Sonia Gandhi said:
9 years ago
No. It is not possible. It has to be decreased.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers