IndiaBIX

Electronics and Communication Engineering - Electronic Devices and Circuits

Exercise : Electronic Devices and Circuits - Section 4
16.
The number of switching functions of 3 variables are
3
8
16
32
Answer: Option
Explanation:

23 = 8.

17.
The applications of shift registers are
  1. Time delay
  2. Ring counter
  3. Serial to parallel data conversion
  4. Serial to serial data conversion
Which of the above are correct?
1, 2, 3
2, 3, 4
1, 2, 3, 4
1, 2, 4
Answer: Option
Explanation:

Shift registers are used for all these applications.

18.

Assertion (A): ECL is fast as compared to TTL.

Reason (R): ECL dissipates less power than TTL.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is true, R is false
A is false, R is true
Answer: Option
Explanation:

ECL dissipates more power than TTL.

19.

Assertion (A): Synchronous counter has higher speed of operation than ripple counter

Reason (R): Synchronous counter uses high speed flip flops.

Both A and R are correct and R is correct explanation of A
Both A and R are correct but R is not correct explanation of A
A is true, R is false
A is false, R is true
Answer: Option
Explanation:

Higher speed is due-to the reason that clock pulses in synchronous counter are applied simultaneously to all the flip-flops.

20.
What will be the maximum conversion time in 6 bit dual slope A/D converter uses a reference of -6v and a 1 MHz clock. It uses a fixed count of 40 (101000).
108 sec
63 μ sec
40 sec
80 μ sec
Answer: Option
Explanation:

for t2 maximum all bits should be 111111 = (63)10

Maximum conversion time = 63 + 40 = 103 μ sec and it takes 5 μ sec to transfer N2 to the O/P register.

tcmax = 108 μ sec.

Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers