Electronics and Communication Engineering - Analog Electronics
Exercise : Analog Electronics - Section 5
- Analog Electronics - Section 11
- Analog Electronics - Section 21
- Analog Electronics - Section 20
- Analog Electronics - Section 19
- Analog Electronics - Section 18
- Analog Electronics - Section 17
- Analog Electronics - Section 16
- Analog Electronics - Section 15
- Analog Electronics - Section 14
- Analog Electronics - Section 13
- Analog Electronics - Section 12
- Analog Electronics - Section 1
- Analog Electronics - Section 10
- Analog Electronics - Section 9
- Analog Electronics - Section 8
- Analog Electronics - Section 7
- Analog Electronics - Section 6
- Analog Electronics - Section 5
- Analog Electronics - Section 4
- Analog Electronics - Section 3
- Analog Electronics - Section 2
11.
A dc power supply has no load voltage of 30 V and full load voltage of 25 V at full load current of 1 A. The output resistance and voltage regulation respectively are
Answer: Option
Explanation:
.
12.
The main advantage of CC amplifier is
Answer: Option
Explanation:
Therefore, it is suitable for impedance matching.
13.
If a = 0.995, IE = 10 mA, ICO = 0.5 mA, then ICEO will be
Answer: Option
Explanation:
.
14.
Assertion (A): In class C amplifier the efficiency is more than that for other classes of amplifiers
Reason (R): In class C amplifier we can get high efficiency over a wideband
Answer: Option
Explanation:
R is not correct because bandwidth of class C amplifier is narrow.
15.
In the following figure C = 0.02 μF, and Vth is known to be of frequency ω = 107 rad/sec and rd = 2.5 Ω and ZTh = RTh = 10 Ω Then phase angle between id and Vd


Answer: Option
Explanation:
Zd = (rd)11 (-jxd) 2 - JΩ
θ = tan-1 (-1/2) 26.56 .
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers