Electrical Engineering - Transformers - Discussion
Discussion Forum : Transformers - General Questions (Q.No. 2)
2.
The turns ratio required to match an 80 
source to a 320 load is
source to a 320 load isDiscussion:
101 comments Page 9 of 11.
Nidu said:
9 years ago
Sqr(Np/Ns) = Zp/Zs,
Because turns ratio is Np/Ns not Ns/Np.
Because turns ratio is Np/Ns not Ns/Np.
Yash said:
9 years ago
Is any technique to know the KVA rating of the transformer without nameplate?
Haji Bilal said:
9 years ago
Hello, @Yash.
It should require to measure current and voltage of transformer from the secondary side. Then you will able to know KVA rating of the transformer!
It should require to measure current and voltage of transformer from the secondary side. Then you will able to know KVA rating of the transformer!
K.Gopalakrishna said:
9 years ago
Transformation ratio k = n2/n1.
Here the given value is in ohms i.e resistive.
That will be more in the winding.
i.e 320/8 = 4.
Here the given value is in ohms i.e resistive.
That will be more in the winding.
i.e 320/8 = 4.
K.gopala krishna said:
9 years ago
Here the value is in ohms.
i.e resistive
It will be more in winding.
n2/n1 = k,
320/80 = k,
= 4.
i.e resistive
It will be more in winding.
n2/n1 = k,
320/80 = k,
= 4.
Prafulla said:
8 years ago
If primary Resistance transfer to the secondary winding. Then,
R2=K^2 R1.
320=K^2 80,
K^2=320/80 = 4.
K= √4 = 2.
R2=K^2 R1.
320=K^2 80,
K^2=320/80 = 4.
K= √4 = 2.
MB SHARON said:
8 years ago
The National Instructional Media Institute (NIMI) for Industrial Traning book.
Np/Ns=Zp/Zs.
Where,
Np=No of turns in the primary.
Ns=No of turns in the secondary.
Zp=primary impedance or (source).
Zs=secondary impedance or (load).
Sol; Source Z=80 ohm.
Load Z =320ohm.
Zp/Zs=80/320.
Turns Ratio =1:2 answer= 2.
1:2 Turns ratio match the 80 ohm source impedance to a 320 ohm load.
Np/Ns=Zp/Zs.
Where,
Np=No of turns in the primary.
Ns=No of turns in the secondary.
Zp=primary impedance or (source).
Zs=secondary impedance or (load).
Sol; Source Z=80 ohm.
Load Z =320ohm.
Zp/Zs=80/320.
Turns Ratio =1:2 answer= 2.
1:2 Turns ratio match the 80 ohm source impedance to a 320 ohm load.
Surinder Rajput said:
8 years ago
Here is the little formula for impedance VS turns.
a= Turns Ratio, (Np/Ns)=Square Root of (Zp/Zs),
Square root of (380/20)=4/1,
Square root of (4/1)=2,
So 2.
a= Turns Ratio, (Np/Ns)=Square Root of (Zp/Zs),
Square root of (380/20)=4/1,
Square root of (4/1)=2,
So 2.
Hemant said:
8 years ago
Can anyone give formula derivation for showing turns ratio in terms of resistance?
Dorsing said:
8 years ago
Given that,
R1=80 ohm
R2=320 ohm
Transformer Ratio,
K = N1/N2 = V1/V2=R2/R1=I2/I1.
K=R2/R1.
= 320/80=4.
R1=80 ohm
R2=320 ohm
Transformer Ratio,
K = N1/N2 = V1/V2=R2/R1=I2/I1.
K=R2/R1.
= 320/80=4.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers