Electrical Engineering - Alternating Current and Voltage - Discussion
Discussion Forum : Alternating Current and Voltage - General Questions (Q.No. 7)
7.
A pulse waveform has a high time of 8 ms and a pulse width of 32 ms. The duty cycle is
Discussion:
17 comments Page 1 of 2.
Neeraj kumar said:
5 years ago
Right, agree @Rn Birla.
(1)
Santosh Singh Meena said:
9 years ago
Duty cycle wave pulse are high width.
(1)
Nisar said:
10 years ago
@Aleksandr.
It's pulse width given in time domain. Actually the x axes is in time rather in meters. So it gives time period for one complete wave.
It's pulse width given in time domain. Actually the x axes is in time rather in meters. So it gives time period for one complete wave.
(1)
Chopra said:
1 decade ago
What is the means by high time?
Dhaval said:
8 years ago
Here, Ton + Toff = pulse width.
Marshall said:
10 years ago
At positive peak the time is 8 milliseconds or at 90 degrees. To reach 360 degrees, the time is 32 milliseconds. Therefore 8/32ms = 0.25. It means the duty cycle is 25%.
Aleksandr said:
10 years ago
Duty cycle = Ton/(Ton+Toff) of pulse waveform not high time/pulse width.
Dear @Jcreddy, 32ms is not total time period it's pulse width as written in question. So question is not correct.
Dear @Jcreddy, 32ms is not total time period it's pulse width as written in question. So question is not correct.
Nasar Bhutta said:
10 years ago
Nice definition of duty cycle.
Skh said:
1 decade ago
High time means peak value of wave.
Jcreddy said:
1 decade ago
Rise time=8ms.
Total timeperiod=32ms.
Dutycycle= (rise time/totaltimeperiod) *100.
8/32 (100) =25%.
Total timeperiod=32ms.
Dutycycle= (rise time/totaltimeperiod) *100.
8/32 (100) =25%.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers