Digital Electronics - MSI Logic Circuits - Discussion

Discussion Forum : MSI Logic Circuits - General Questions (Q.No. 4)
4.

Refer to the keyboard encoder in figure (a). Sometimes when the 5 key is pressed, the system attached to the keypad does not respond. The 5 input on the 74147 is monitored with a digital storage scope while repeatedly pressing the 5 key, and the waveform in figure (b) is obtained; the P above the trace indicates the points at which the technician pressed the key. What is most likely wrong with the circuit?

The switches on the 5 key are intermittent; the contacts need to be cleaned or the switch replaced.
The pull-up resistor connected to the 5 key is bad and should be replaced.
The common ground connection at the bottom of the 0 key has a bad solder connection; repair the connection.
The 74147 is intermittent, possibly due to high temperature, and should be replaced.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
Be the first person to comment on this question !

Post your comments here:

Your comments will be displayed after verification.