Digital Electronics - Digital Concepts - Discussion
Discussion Forum : Digital Concepts - General Questions (Q.No. 5)
5.
The range of voltages between VL(max) and VH(min) are ________.
Discussion:
38 comments Page 3 of 4.
Rahul said:
1 decade ago
Generally In digital logic design there are voltage and current parameters defined so regarding to these parameters it is described that the voltage range between the Vlmax and VHmin in unacceptable i.e it is neither 1 nor 0.
Sai krishna kasam said:
1 decade ago
It won't make sense if set max and min voltages without knowing circuit components so acceptable.
Pooja said:
1 decade ago
There is something called strong 0 and weak 1. Could that be related here, because a voltage near to 5V say 4.8V is treated as strong 1.
Shrenika said:
1 decade ago
Why it is unacceptable?
Rudrasen pal said:
1 decade ago
I think in digital by quantization.
We make that level of supply according to our device.
Generally its 0/5 volt.
We make that level of supply according to our device.
Generally its 0/5 volt.
Parul said:
1 decade ago
My question is if value vary from manufacture then its value should be unknown, why it is not acceptable? If in any IC value matches then what?
ARIF said:
1 decade ago
It is unacceptable because of emitter current is zero.
BHARGAV said:
1 decade ago
I think that the values are not necessary as the circuit operates for either max or min with acceptable errors.
Nitesh said:
1 decade ago
I think it related to Noise Margin. So analyse the question right to noise margin.
Srilu said:
10 years ago
Why can't it is unknown.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers