Civil Engineering - Surveying - Discussion
Discussion Forum : Surveying - Section 1 (Q.No. 2)
2.
If h is the difference in level between end points separated by l, then the slope correction is 
. The second term may be neglected if the value of h in a 20 m distance is less than
. The second term may be neglected if the value of h in a 20 m distance is less than
m1 m
2 m
3 m
Discussion:
67 comments Page 4 of 7.
Sandeep dharani said:
8 years ago
How will get 3.3?
Anybody, please explain it.
Anybody, please explain it.
Sanjay said:
8 years ago
Here all the options are correct as we apply them in the second term because the answer is in 10^-3.
So it is neglected. As we take to consider the highest value always so 3 is the correct answer.
So it is neglected. As we take to consider the highest value always so 3 is the correct answer.
Aadil said:
8 years ago
The second term may safely be neglected for slopes flatter than about 1 in 25. Therefore,
h^2/2l=25%.
H^2/2*20=0.25,
H^2=10,
H=3.16.=3 (approx).
h^2/2l=25%.
H^2/2*20=0.25,
H^2=10,
H=3.16.=3 (approx).
Radhika said:
8 years ago
How will get 3.3?
P.ayub said:
8 years ago
If the second term is neglected the slope correction falls under <=20%.
So it may be taken as h^2/2l=20%.
h^2/2*20=0.2.
h=2.82<3.
So answer is 3.
So it may be taken as h^2/2l=20%.
h^2/2*20=0.2.
h=2.82<3.
So answer is 3.
Pradeep said:
8 years ago
Please, explain the answer clearly.
Juhi said:
8 years ago
How it come 3.3?
Please explain clearly.
Please explain clearly.
Rathika said:
8 years ago
Here, root 40 = 6.32.
Then how will get h= 3.3?
Then how will get h= 3.3?
Vaibhav rana said:
8 years ago
@All.
Answer is 1
Very simple put tan(3°)=h/20.
You will get the answer.
h=1m.
Answer is 1
Very simple put tan(3°)=h/20.
You will get the answer.
h=1m.
Venkatesh said:
8 years ago
How? Explain.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers