Civil Engineering - Surveying - Discussion
Discussion Forum : Surveying - Section 1 (Q.No. 32)
32.
A bearing of a line is also known as
Discussion:
68 comments Page 1 of 7.
Dhanraj chandel said:
8 years ago
True bearing is correct because any line is a magnetic meridian and azimuth and reduced bearing but we correct the magnetic bearing by add &subt. Declination angle then found true bearing calculation so bearing of any line is also known as 'true bearing'.
Amitkumarsachin said:
8 years ago
I thik answer should true bearing.
Because, if angle of bearing is magnetic bearing, then it's vairry according to time due to change of declination, in this question only mention that angle of bearing, not measured angle of bearing.
Because, if angle of bearing is magnetic bearing, then it's vairry according to time due to change of declination, in this question only mention that angle of bearing, not measured angle of bearing.
Iqbal Singh said:
1 decade ago
Ans, is false because, true bearing of line is measured from true meridian.
Hence, correct, answer is magnetic meridian because bearing of a line with magnetic meridian is known as magnetic bearing or "simply bearing of a line".
Hence, correct, answer is magnetic meridian because bearing of a line with magnetic meridian is known as magnetic bearing or "simply bearing of a line".
Uday said:
6 years ago
True bearing is measured from true meridian (true north and true south).
And magnetic bearing measured from magnetic Meridien (magnetic north and magnetic south).
Azimuth is another name of bearing.
And magnetic bearing measured from magnetic Meridien (magnetic north and magnetic south).
Azimuth is another name of bearing.
Ogundele dare said:
9 years ago
A true bearing to a point is the angle measured in degree in a clockwise direction from the North line. This can simply be referred as the bearing. So true bearing is absolutely correct.
Palash Biswas said:
6 years ago
Answer is magnetic bearing because magnetic bearing is also known as bearing of line.
And angle between true miridian and line is called true bearing and also called azimuth.
And angle between true miridian and line is called true bearing and also called azimuth.
MAYANK said:
9 years ago
The correct answer is true bearing.
Magnetic bearing always measured from magnetic meridian which is not given in the question.
So, the answer is true bearing.
Magnetic bearing always measured from magnetic meridian which is not given in the question.
So, the answer is true bearing.
Rahul said:
1 decade ago
No its not sure that it will be true bearing if the bearing is with magnetic meridian then it will be magnetic bearing and similarly in case of azimuth also.
KESHAV said:
8 years ago
Yes, the correct answer is B, because the instrument which we have to measure the bearings are magnetic/prismatic compass nt true meridian or something else.
RAVI said:
9 years ago
The answer is Reduced bearing.
Wcb can refer azimuth
QCB OR REDUCED can refer. Bearing.
Condition is that they are being measured from North.
Wcb can refer azimuth
QCB OR REDUCED can refer. Bearing.
Condition is that they are being measured from North.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers