Civil Engineering - Structural Design Specifications - Discussion

Discussion Forum : Structural Design Specifications - Section 1 (Q.No. 3)
3.
The gap between web plates and flange plates for fillet welds should not be more than
0.5 mm
0.75 mm
1.0 mm
1.25 mm
1.5 mm
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
7 comments Page 1 of 1.

Haris said:   4 years ago
1.5 is correct. Agree with the given answer.

Unique said:   4 years ago
Yes, 1mm is the correct option as per IS800-2007.

Rohit said:   5 years ago
1 mm is correct. Very Good explanation, Thanks @Shivam.

Roy said:   6 years ago
Yes, it's 1 mm.

Thehri said:   7 years ago
Anyone explain the reason.

Satya said:   7 years ago
For fillet welds, gap shall not exceed 1 mm at any point before welding.

Shivam said:   8 years ago
As per is 800, clause 8.6.3.5 Welded construction.

The gap between the web plates and flange plates shall be kept to a minimum and for fillet welds shall not exceed 1 mm at any point before welding.
(1)

Post your comments here:

Your comments will be displayed after verification.