Civil Engineering - Structural Design Specifications - Discussion
Discussion Forum : Structural Design Specifications - Section 1 (Q.No. 33)
33.
The over all depth of a solid slab is 20 cm and effective depth is 15 cm. The horizontal distance between parallel main reinforcement should not be more than
Discussion:
14 comments Page 2 of 2.
Er NK said:
7 years ago
Read the question properly.
Not more than.
Not more than.
Chandu said:
6 years ago
I think 3d or 450 whichever small.
As per question, 3d=3*150=450mm.
From above smallest among both is 450mm.
So the answer is 45 cm.
As per question, 3d=3*150=450mm.
From above smallest among both is 450mm.
So the answer is 45 cm.
Khattak said:
5 years ago
Here the effective depth of slab is mentioned if not then obviously be the smaller one, also they mentioned should not be more than, means 30cm is also possible but the greater here is 45cm, so 45 is the correct answer.
DIPU Halder said:
5 years ago
300 mm is the correct answer.
According to Is 456:2000. Clause 26.3.3.
According to Is 456:2000. Clause 26.3.3.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers