Civil Engineering - Strength of Materials - Discussion
Discussion Forum : Strength of Materials - Section 1 (Q.No. 44)
44.
A beam is said to be of uniform strength, if
Discussion:
10 comments Page 1 of 1.
Deepak raj joshi said:
1 month ago
In a beam of uniform strength, either the cross-section is varied (tapered) or material properties are adjusted.
So that: σ =M/Z =constant.
So that: σ =M/Z =constant.
Saroj bhatt said:
2 years ago
I think the bending stress is the same throughout is the correct one.
HiPEi said:
4 years ago
Beam is said to be uniform strength if at every section along its longitudinal axis, the bending stress is same.
HiPEi said:
4 years ago
Beam is said to be uniform strength if at every section along its longitudinal axis, the bending stress is same.
(1)
Shubham said:
4 years ago
The strength of any beam depends upon its material and its cross-section. So, E is correct.
U.S.lakshmi said:
6 years ago
If bending moment not the same throughout the section the meaning is bending stress is also not the same throughout the section this is the logic so in my consideration option E is correct.
Rajesh said:
8 years ago
A is correct because z constant but bm and stress variable and if moment constant then stress also constant.
Samiran Mondal said:
8 years ago
But M is directly proportional to Z so bending stress is the correct answer.
Gajan Rana said:
9 years ago
As per my knowledge, the right answer and the Necessary condition is Z is directly proportional to M at every section.
Z= Section modulus.
M= Moment.
Z= Section modulus.
M= Moment.
Siddu said:
9 years ago
I think A is the perfect answer.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers