Civil Engineering - Steel Structure Design - Discussion
Discussion Forum : Steel Structure Design - Section 1 (Q.No. 19)
19.
If the depth of two column sections are equal, then the column splice is provided
Discussion:
12 comments Page 1 of 2.
Harsh Shukla said:
5 years ago
Splice in web designed for BM and SF.
Splice in flange designed for axial forces only (i.e. Tension and Compression only).
No need for any filler and bearing plates, the Only splice is needed if the depth is the same.
If upper column depth is less than the bottom column, in that case, filler, bearing and splice all three needed.
Splice in flange designed for axial forces only (i.e. Tension and Compression only).
No need for any filler and bearing plates, the Only splice is needed if the depth is the same.
If upper column depth is less than the bottom column, in that case, filler, bearing and splice all three needed.
(2)
Praveen said:
7 years ago
It would be option B because when one column is placed on another column then a bearing plate is provided between both of column. And filler plate is provided in case of unequal depth.
Michael L Rokhum said:
1 decade ago
Since the two column is of equal depth then no extra plates are required for connection of column splice. Erected bolts are used for the connection.
Shivam said:
6 years ago
I think that depth of column is equal but about width not mentions so we don't have any idea for plate so the answer is D.
AdaRsh said:
9 years ago
Filler plate are used when two column section having unequal section. In above condition just milled ends are provided.
(1)
Garry said:
8 years ago
Column splices should be used at the junction but the option is not given here so none of the above is correct.
(1)
Rajat said:
7 years ago
To connect two column of equal depth, bearing plate is used to resist some part of bearing stress.
Vicky said:
10 years ago
But splicing plates have to be provided with a capacity to take 50% of axial load.
(1)
Amit said:
2 weeks ago
A column splice is used to connect them. So, Option D is correct.
Neha said:
1 decade ago
Then where will be the column splice provided.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers