Civil Engineering - Steel Structure Design - Discussion
Discussion Forum : Steel Structure Design - Section 1 (Q.No. 30)
30.
If the unsupported length of a stanchion is 4 metres and least radius of gyration of its cross-section is 5, the slenderness ratio of the stanchion, is
Discussion:
12 comments Page 1 of 2.
Sreekutty said:
2 years ago
Slenderness ratio = L/r.
= 4m/5cm = 400cm/5cm.
= 80cm.
= 4m/5cm = 400cm/5cm.
= 80cm.
(1)
@Munni said:
4 years ago
No, your formula is not correct @Dinesh.
As it should be.
Slenderness ratio=Eff Length/Least r.
As it should be.
Slenderness ratio=Eff Length/Least r.
Jiyau Rahman Ansari said:
4 years ago
Thank you for your explanation @Dinesh @Laxman.
Dinesh said:
6 years ago
Slenderness ratio = r/L.
So, 5/4 -> 5*100=500 & 4 m*1000=4000 mm,
Then, 500/4000 = 1/8.
= 1/8 Means 80 as it is the ratio..
So, 5/4 -> 5*100=500 & 4 m*1000=4000 mm,
Then, 500/4000 = 1/8.
= 1/8 Means 80 as it is the ratio..
Vatsyayan said:
7 years ago
It seems the gyration radius should be in the unit of cm r=50mm You are correct @Laxman.
Laxman said:
8 years ago
4 * 100 = 4000mm, 5cm = 500,4000/500 = 80.
(1)
Pragyan said:
9 years ago
As per formula, Slenderness ratio = r/l.
So how the answer is 80?
So how the answer is 80?
(1)
Shubham Agrawal said:
9 years ago
As per the option, the only possible conversion is from 4m = 400cm.
Durga said:
9 years ago
Yes. How to convert?
Priyanka o said:
9 years ago
Yes. How to convert centimeters?
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers