IndiaBIX

Civil Engineering - Steel Structure Design - Discussion

Discussion Forum : Steel Structure Design - Section 2 (Q.No. 17)
Steel Structure Design
17.
Pick up the correct statement from the following:
The minimum pitch should not be less than 2.5 times the gross diameter of the river
The minimum pitch should not be less than 12 times the gross diameter of the rivet
The maximum pitch should not exceed 10 times the thickness or 150 mm whichever is less in compression
All the above.
Answer: Option
Explanation:
No answer description is available. Let's discuss.
Discussion:
8 comments Page 1 of 1.
Komatwad priya said:   4 years ago
Pich diameter not be less than 2.5 times gross diameter.
Prakash said:   5 years ago
Yes, it's 2.5 times of nominal dia. Not gross dia.
Shaktisinh said:   7 years ago
Yes, it should be nominal dia of the rivet.
Shubham said:   7 years ago
It should be 2.5 times the nominal diameter.
Garry said:   8 years ago
It should be the normal diameter of rivet not the gross diameter these two are different things.
Faizan Raza Khan said:   8 years ago
The maximum pitch of the bolts for a compression member shouldn't exceed 12t or 200mm whichever is less.

Where t = minimum thickness of plate joined.
IS800;2007, clause 10.2.3.2 (pg no-74).
Giddy said:   9 years ago
A, B seems same. Am I right?
Surya prakash said:   10 years ago
It is 800-2007 minimum pitch should not be less than 2.5 times the nominal diameter of fastener.
Post your comments here:

Your comments will be displayed after verification.

Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers