Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 1 (Q.No. 44)
44.
The percentage of minimum reinforcement of the gross sectional area in slabs, is
Discussion:
18 comments Page 2 of 2.
Viru Kapoor said:
7 years ago
Generally 0.15.
HYSD bars 0.12.
So, the Given answer is right.
HYSD bars 0.12.
So, the Given answer is right.
Gaurav Dhiman said:
7 years ago
0.15% is the correct answer. Because the minimum grade of steel used in RCC structure is Fe250.
Shivam said:
8 years ago
Ans should be .12 because they don't mention type of bar.
So take min i.e .12%.
So take min i.e .12%.
SHANKAR CHOWHAN said:
8 years ago
0.15% For fe250.
0.12% for Fe 415 then,
Fe 500=?
0.12% for Fe 415 then,
Fe 500=?
Md Amir Warsi said:
8 years ago
Not clear. In this question, which reinforcement is provided but 0.15% for mild steel and 0.12% for HYSD bar.
SUSNATA NANDY said:
9 years ago
The steel reinforcement may be calculated approximately on the % basis of concrete:
And the value depends on the grade of steel.
And the value depends on the grade of steel.
HITEN said:
10 years ago
1. 0.15 % for FE 250.
2. 0.12% for FE 415.
2. 0.12% for FE 415.
Mahesh katkar said:
1 decade ago
1) 0.15 % for mild steel and.
2) 0.12 % for other than mild steel.
2) 0.12 % for other than mild steel.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers