Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 1 (Q.No. 16)
16.
The diameter of longitudinal bars of a column should never be less than
Discussion:
10 comments Page 1 of 1.
Md samsuzzaman said:
1 decade ago
This answer is appropriate as per IS 456:2000.
Ashok maurya said:
1 decade ago
Due to buckling so not use < 12 mm diameter.
PIYUSH SINGH said:
1 decade ago
IS 456 (Clause:- 26.5.3.1 d) the bars shall not be less than 12 mm in diameter.
Himanshu bhatt said:
1 decade ago
Diameter should not be less than 12 mm.
Ashutosh mohod said:
10 years ago
But for minimum cover case it is written in the code 456:2000, that if column size is less than 200 mm and reinforcement diameter is less than 12 mm, than for this case 25 mm of cover should be provided otherwise 40 mm which shows that diameter size could be less than 12 mm.
G.S Meena said:
8 years ago
The diameter of longitudinal bar of column is not less than 12 mm.
Shivam said:
8 years ago
Thanks @Piyush Singh.
Sumit said:
7 years ago
The longitudinal bar not be less than 12.
Abhijit khandpasole said:
6 years ago
For stub column we use 10MM dia of bar.
FORID ALAM said:
3 years ago
It's As per is 456-2000.
Clause 26.5.3.1.
Clause 26.5.3.1.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers