Civil Engineering - RCC Structures Design - Discussion
Discussion Forum : RCC Structures Design - Section 4 (Q.No. 34)
34.
Columns may be made of plain concrete if their unsupported lengths do not exceed their least lateral dimension
Discussion:
19 comments Page 1 of 2.
B.Singh said:
3 years ago
I think B is correct.
(1)
Prasanna Gosavi said:
4 years ago
In the case of a pedestal, the unsupported length does not exceed three times the least lateral dimension.
The pedestal can either be designed as a PCC or RCC structure.
Here, such column is made of PCC, so it may be a case of pedestal.
The pedestal can either be designed as a PCC or RCC structure.
Here, such column is made of PCC, so it may be a case of pedestal.
Sohail said:
4 years ago
Coloum or strut is more than 3.
Pedestal is less than 3.
Because of unsupported length. So the answer is more than three is correct.
Pedestal is less than 3.
Because of unsupported length. So the answer is more than three is correct.
(1)
MJM Gcek said:
4 years ago
I think it should be Should be 3.
Pramit Samanta said:
4 years ago
Minimum reinforcement in the pedestal is 15%.
(1)
Raghul.s said:
5 years ago
Slenderness ratio: Less than 3 for pedestal, 3-12 for short column, greater than 12 long column. So the answer is 3.
Shruti said:
6 years ago
3 times is right.
Shreya said:
7 years ago
3 is right.
@Abhishek please read the question again.
@Abhishek please read the question again.
Maheshmeena said:
7 years ago
Leff>3times of least lateral dimension--column and leff<3times of least lateral dimension-- pedestal. But in question saying the unsupported length (leff) not exceed their least lateral dimension. So, it is more than 3times and here the answer is 4times.
Nithyanandham said:
7 years ago
This is stated in Old codebook SP 24-1983:
When the length of the compression member is less than three times the least lateral dimension it is called a pedestal.Pedestals can be of plain concrete also;
But in revised code IS 456 2000---the minimum reinforcement should be provided in all members to ensure the failure due to shrinkage, temperature.
When the length of the compression member is less than three times the least lateral dimension it is called a pedestal.Pedestals can be of plain concrete also;
But in revised code IS 456 2000---the minimum reinforcement should be provided in all members to ensure the failure due to shrinkage, temperature.
Post your comments here:
Quick links
Quantitative Aptitude
Verbal (English)
Reasoning
Programming
Interview
Placement Papers